Importing and Exporting Files
Importing and Creating Surfaces
There are many different file types which can be used to import or create surfaces in T3RRA Desig...
File types
Here is the list of available file types for import (instructions of how to use some files types ...
Importing Elevations if you are a John Deere Operator
T3RRA Design Plus can import elevation data from three separate John Deere sources. These are:Joh...
Importing a Surface from an Existing Elevation Surface
By working in the Surface Tab in the Layers Panel, select: Layer > Import > From existing elevati...
Importing a Surface from Raw Data Points
By working in the Surface Tab in the Layers Panel, select: Layer > Import > From raw data points ...
Importing Annotations to T3RRA Design Plus
Depending on your available data, there are many annotations which can be imported into your proj...
Exporting Files from T3RRA Design Plus
There is a lot of flexibility when exporting from T3RRA Design Plus. This includes control files ...
Exporting Files - Control File
It is also possible to export a Control File from T3RRA Design Plus. This is how you get your des...
Exporting a PDF
It is possible to download your design file as a PDF, either to share or to print. This is done b...
Exporting a T3RRA Cutta (*.tci) control file
This is our preferred control file format. It works very well with T3RRA Cutta, funnily enough.Op...
Exporting a DXF file
The DXF file type is a common interchange format used by civil designers. We support exporting a ...
Exporting a Field Level II for FMX/TMX (*gps) display
The .gps file is used in Trimble displays. We support exporting files for these systems with a de...
Exporting T3RRA Control File to JD Ops Center
Open the Export window.Choose "JD Ops Center: T3RRA Control File(.tci)", choose data to export an...
Importing T3RRA Control File from JD Ops Center
Open the Import window and select T3RRA Control File(tci).Clicking 'Pick File' button will open J...