Implementing issues - T3RRA
Bi-Directional error in T3RRA.
Symptoms:The implement consistently cuts when heading in one direction and fills in the other dir...
Tractor position icon is far above or below the surface.
Symptoms:When implementing the position icon appears to be a long way above or below the surface ...
Tractor position icon does not adjust when you zero against a benchmark.
Symptoms: You are parked over a physical benchmark and want to adjust the map location so that t...
Map icon on the T3RRA software screen lags behind the actual field position.
Symptoms:The screen update appears to be “laggy”. When you turn a corner and are back on a straig...
‘As-Applied’ not updating correctly
Symptoms: When on the implementation screen, the “As-Applied” Cut/Fill map was not updating as p...
Project has moved N/S or E/W.
Symptoms: When you return to an existing job the map is no longer aligned with the position of t...
My drain design is no longer present in the ‘Apply’ wizard step.
Symptoms: The Cut/fill map of drain surface in the Apply step is representing no cut and no fill...
My drains have ‘bumps’ in them that weren’t present when I designed them.
Symptoms: A drain line was created with a set profile but when implementing it seems to have une...
Implement is offset a large amount after 'zeroing'
Symptom:Your implement is offset by a large amount when you zero before implementing.Possible cau...