6 | Cab Hardware Installation
This section covers installation of operator interface components and optional control inputs.
Required:
- Arm/Engage Switch
- Tablet
Optional:
- Joystick
- Tractor CAN Connection
6.1 | Arm/Engage Switch Installation
The COMMAND Arm/Engage Switch is used by the operator to both Arm/Disarm ECU control outputs, and...
6.2 | RuggON PX501 Tablet Installation
This section covers installation of a typical RuggON PX501 tablet supplied by T3RRA, but these in...
6.3 | Joystick Connection (Optional)
Overview In most cases the manual control of hydraulic functions are already available (e.g. when...
6.4 | Tractor CAN Connection (Optional)
Overview COMMAND can be connected to a 250 or 500kbps Tractor CANBUS if present, allowing the ECU...