Recent Activity
Craig
User for 1 year
Recently Created Pages View All
2.1 | System Architecture
Theory of Operation COMMAND is an electronic control system designed by T3RRA consisting of an El...
6.4 | Tractor CAN Connection (Optional)
Overview COMMAND can be connected to a 250 or 500kbps Tractor CANBUS if present, allowing the ECU...
4.4 | ISOBUS Requirements
COMMAND does not explicitly require the tractor to be fitted with an ISOBUS system to operate; h...
4.3 | Power Requirements
A switched 12V DC power supply with a minimum capacity of 10A is required. The harnessing system ...
5.4 | Connecting COMMAND to the ISOBUS
ECU Mounted In-cab With the COMMAND ECU mounted in-cab: Locate the in-cab 4-way ISOBUS connector...
Recently Created Chapters View All
7 | Tractor / External Valve Connection & Setup
COMMAND can interface with tractor hydraulic systems using different connection methods depending...
9 | IMU Installation and Configuration
This section covers installation and configuration of terrain compensation systems used with COMM...
8 | Receiver Connection and Configuration (GNSS)
Connecting various GNSS receivers for operation with COMMAND
6 | Cab Hardware Installation
This section covers installation of operator interface components and optional control inputs. R...
4 | Pre-Installation Requirements
Tractor, power and ISOBUS / CANBUS requirements for the usage of COMMAND
Recently Created Books View All
Recently Created Shelves
Craig has not created any shelves