4 | Wizard
4.1 | The T3RRA Wizard
The Wizard contains T3RRA software’s primary tools for surveying, designing and implementing. The...
4.2 | Common tools found in the Wizard
Several buttons appear on multiple wizard pages. The reference below shows the tools and any limi...
4.3 | Zoom Controls
There are several ways to zoom the map. Pinch to zoom Use a two-finger pinch on the screen: move ...
4.4 | Image Overlays
Image overlays imports geo-referenced image data into a field. To access the image overlay, press...
4.5 | Choose Mode/Terrain/Layer
Mode 2D View displays the map as a 2D aerial view by default. 3D View shows terrain as small hill...
4.6 | GPS Data
The GPS information button is in the lower-right corner of the screen. It shows your current lati...
4.7 | Markers
Markers identify points of interest at user-selected locations on a design. A marker can also ser...
4.8 | Start, Pause and Stop controls
On the Surveying and Implementation screens, Start, Pause, and Stop control the beginning and end...
4.9 | Drain Surveying specific edit controls
These tools are available in the Collection and Surfacing stages when drain survey points exist. ...
4.10 | 2D Current Position Tracking Options
When surveying or implementing, four options control how the vehicle location is tracked on the s...
4.11 | 3D Current Position Tracking Options
When surveying or implementing in 3D, choose between two tracking options: Follow Tractor and Sto...
4.12 | Screenshot
To capture the current screen, press the camera button at the top right of any mapping window. A ...
4.13 | Battery Level
The Battery level indicator is at the top right of the screen, next to the screenshot button. It ...