Skip to main content

2.5 | System Components

A Level COMMAND system consists of multiple hardware and software components depending on machine configuration and enabled automatic control functions.

Required Components

The following components are required for normal Level COMMAND operation.

COMMAND ECU

The COMMAND ECU provides hydraulic control, machine interfacing, sensor monitoring, and automatic control management.

The ECU communicates with Level COMMAND and connected machine systems during operation.

GNSS Receiver System

A compatible RTK-capable GNSS receiver system is required for machine positioning and automatic control.

Supported receiver compatibility may vary depending on installed COMMAND hardware and machine configuration.

Operator Display Device

Level COMMAND operates on a compatible display device used for:

  • project management
  • terrain visualisation
  • diagnostics
  • and operator interaction

The display device communicates with the COMMAND ECU during operation.

Level COMMAND is primarily deployed on ruggedised RuggON tablet platforms including the PX501 and SOL7 due to their environmental durability, sunlight readability, and suitability for machine-control applications.

Hydraulic Control Hardware

Compatible hydraulic control valve hardware is required for automatic implement movement.

Depending on machine configuration, hydraulic interfaces may include:

  • SCVs / auxiliary control valves
  • proportional solenoid valves
  • and ratiometric load sensing proportional valves

Optional Components

Additional components may be installed depending on machine configuration and enabled functionality.

Cross-Slope Sensors

Cross-Slope-capable configurations require compatible implement roll-angle feedback sensors.

Supported Cross-Slope feedback sources currently include:

  • T3RRA TARS IMU systems
  • and compatible StarFire internal roll-angle sensors

Additional Operator Controls

Optional operator control devices may include:

  • External Engage switch,
  • Joystick controls

Vehicle Data Interfaces

Supported machine configurations may include additional vehicle communication interfaces such as:

  • ISOBUS
  • J1939
Back to top