1 | Introduction
1.1 | Title
Operation & User Manual 2026
1.2 | About Level COMMAND
Level COMMAND (LC) is a GNSS-based machine control software operating environment developed by T3...
1.3 | Intended Use
Level COMMAND is intended for use on supported construction, landforming, and earthmoving machine...
1.4 | Important Notices
Level COMMAND Operators Manual © 2026 T3RRA Notice of Rights No part of this publication may be r...
1.5 | Operator Responsibilities
System Usage The COMMAND hardware platform and Level COMMAND operating environment must only be i...
1.6 | Important Safety Information
General Safety Guidelines Read and Understand Instructions Operators must read this manual in ful...
1.7 | Terminology & Definitions
Armed Automatic control is enabled and ready to assume implement control when engagement conditio...