Recently Updated Pages
7.4 | Updates & Release Management
The Update/Changelog page allows you to keep Level COMMAND up to date and review changes introduc...
7.1 | Appearance
The Appearance page allows you to customise how Level COMMAND is displayed. These settings only a...
6.4 | Blade Shift & Target Adjustment
Blade Shift allows the operator to temporarily adjust the Target Position during grading. This pr...
4.4 | Setting Zero
What is Zeroing? Zeroing aligns the machine to the design surface so that Level COMMAND can guide...
3.9 | Validating System Operation
Status Validation Checks ItemExpected ResultECU StatusConnected and operating normallyGNSS Status...
3.4 | Configuring GNSS
The Inputs/Offsets page is used for selection of input sensors, such as GNSS receivers for heigh...
1.2 | About Level COMMAND
Level COMMAND (LC) is a GNSS-based machine control software operating environment developed by T3...
10.6 | CANBUS / Communication Issues
Issue Possible Cause Recommended Action ISOBUS communication unavailable ISOBUS harness d...
10.4 | Joystick & Operator Input Issues
Issue Possible Cause Recommended Action Joystick not detected Joystick harness disconnect...
10.3 | Hydraulic Control Issues
Issue Possible Cause Recommended Action No hydraulic movement Valve harness disconnected ...
6.3 | Joystick Connection (Optional)
Overview In most cases the manual control of hydraulic functions are already available (e.g. when...
2.1 | System Architecture
Level COMMAND continuously determines the machine's position, compares it to the design surface a...
2.1 | System Architecture
Theory of Operation COMMAND is an electronic control system designed by T3RRA consisting of an El...
6.2 | RuggON Tablet Installation
This section covers installation of a typical RuggON tablet supplied by T3RRA, but these instruct...
5.6 | Surveying & Field Data Collection
The Survey tool records GNSS-referenced terrain and feature data for design creation, project ver...
3.5 | Configuring Valve Outputs
The Valve Configs page is used to set up the control output interface for each control function....
Appendix A | COMMAND Settings Reference
Introduction The COMMAND Settings pages provide access to the configuration and diagnostic functi...
7.7 | Diagnostics / Advanced
The Diagnostics & Advanced page provides access to advanced application settings, diagnostic tool...
7.6 | Support & Error Reporting
The Support & Error Reporting tools allow operators and dealers to receive remote assistance and ...
7.5 | Licensing
The Licensing page is used to activate Level COMMAND and register the software for normal operati...