Skip to main content

Recently Updated Pages

6.6 | Survey Point edit controls

T3RRA Operator's Manual 6 | Surfacing

During surveying and surfacing, there are various different ways to edit/remove drain and survey ...

Updated 2 weeks ago by David

4.5 | Choose Mode/Terrain/Layer

T3RRA Operator's Manual 4 | Wizard

Mode 2D View displays the map as a 2D aerial view by default. 3D View shows terrain as small hill...

Updated 2 weeks ago by David

1.8 | Installing T3RRA Software

T3RRA Operator's Manual 1 | General

T3RRA software is typically installed and configured by your authorised T3RRA dealer as part of s...

Updated 2 weeks ago by David

7.9 | Offset Design

T3RRA Operator's Manual 7 | Design

 Select the 'Offset' button to raise or lower the surface height of a field or  region. This can ...

Updated 2 weeks ago by David

7.9 | Fendt 900 SCR/S4

COMMAND Manual (EN) 7 | Tractor / External Valve Connection...

Applicable to: Supported Fendt 900 SCR/S4 tractors using the COMMAND Fendt SCR/S4/MT valve interf...

Updated 3 weeks ago by Renee

7.8 | Fendt 800 SCR/S4

COMMAND Manual (EN) 7 | Tractor / External Valve Connection...

Applicable to: Supported Fendt 800 SCR/S4 tractors using the COMMAND Fendt SCR/S4/MT valve interf...

Updated 3 weeks ago by Renee

7.7 | Fendt ONE — 900 Gen 6/7 & 1000 Gen 2/3

COMMAND Manual (EN) 7 | Tractor / External Valve Connection...

Applicable to: Supported Fendt 900 Gen 6/7 and Fendt 1000 Gen 2/3 tractors using the COMMAND Fend...

Updated 3 weeks ago by Renee

7.5 | Versatile — Analog Scraper Control

COMMAND Manual (EN) 7 | Tractor / External Valve Connection...

Applicable to: Supported Versatile L4WD and DeltaTrack tractors fitted with the 6-pin C920 laser/...

Updated 3 weeks ago by Renee

7.4 | CNH Pre AFS Connect / PLM Intelligence

COMMAND Manual (EN) 7 | Tractor / External Valve Connection...

Applicable to: Case IH / New Holland tractors prior to AFS Connect or PLM Intelligence systems. C...

Updated 3 weeks ago by Renee

7.3 | CNH Direct Connect (AFS Connect / PLM Intelligence)

COMMAND Manual (EN) 7 | Tractor / External Valve Connection...

Applicable to: Case IH / New Holland tractors with AFS Connect or PLM Intelligence systems. Conne...

Updated 3 weeks ago by Renee

7.2 | John Deere Legacy (Analog)

COMMAND Manual (EN) 7 | Tractor / External Valve Connection...

Applicable to: John Deere tractors with analog SCV control (typically pre-2005 models). Connectio...

Updated 3 weeks ago by Renee

7.1 | Modern John Deere (CANBUS)

COMMAND Manual (EN) 7 | Tractor / External Valve Connection...

Applicable to: John Deere tractors with CANBUS-based SCV control (typically 2005+ models). Connec...

Updated 3 weeks ago by Renee

6.4 | Tractor CAN Connection (Optional)

COMMAND Manual (EN) 6 | Cab Hardware Installation

Overview COMMAND can be connected to a 250 or 500kbps Tractor CANBUS if present, allowing the ECU...

Updated 3 weeks ago by Renee

2.3 | GNSS Receiver & IMU Compatibility

COMMAND Manual (EN) 2 | System Overview

The requirements below outline the important components and considerations for using a GNSS recei...

Updated 3 weeks ago by Renee

7.14 | Levee Design

T3RRA Operator's Manual 7 | Design

'Levees' allows you to create repeating or singular levees at set elevations. Levees can be added...

Updated 3 weeks ago by Renee

7.12 | Pattern Drain Design

T3RRA Operator's Manual 7 | Design

This design tool allows for simple design of many parallel drains at once.  Watch the Pattern Dra...

Updated 3 weeks ago by Renee

7.8 | Smooth Design

T3RRA Operator's Manual 7 | Design

Select the 'Smooth' button to create a more regular surface with fewer and more gradual hummocks ...

Updated 3 weeks ago by Renee

7.1 | Design

T3RRA Operator's Manual 7 | Design

Measure twice, cut once.  It’s an old maxim but a good one. You can do as many designs as you wan...

Updated 3 weeks ago by Renee

5.7 | Survey Guidelines

T3RRA Operator's Manual 5 | Surveying

No matter what type of surveying you are doing you are able to implement guidance lines on the su...

Updated 3 weeks ago by Renee

4.2 | Common tools found in the Wizard

T3RRA Operator's Manual 4 | Wizard

Several buttons appear on multiple wizard pages. The reference below shows the tools and any limi...

Updated 3 weeks ago by Renee