Search Results

The COMMAND system must only be installed and operated by individuals trained in its functional and safety requirements. Use of the system outside the scope of this manual may result in machine damage or personal injury. If any information within this manual i...

Correct component selection is important for reliable installation and operation of the COMMAND system. Harnessing requirements will vary depending on tractor model, implement configuration, GNSS receiver type, and hydraulic interface. For assistance selecting...

General Safety Guidelines Read and Understand Instructions Operators must read this manual in full before using the system. Do not operate the system without a complete understanding of its controls and functions. Authorized Personnel Only Only trained and qua...

System Usage The COMMAND hardware platform and Level COMMAND operating environment must only be installed, commissioned, and operated by personnel familiar with machine-control systems and associated safety procedures. Any safety warnings or images used in thi...

Tractor Requirements COMMAND's tractor requirements are as follows: Provide a suitable power supply as specified in Section 4.3. Have compatible SCVs or auxiliary control valves The tractor does not need to be ISOBUS-equipped; however, upgrading to ISOBUS is ...

Installation & Operators Manual 2026

COMMAND Installation & Operators Manual © 2026 T3RRA Pty Ltd Notice of Rights No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any mea...

Level COMMAND Operators Manual © 2026 T3RRA Notice of Rights No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, m...

  Operation & User Manual       2026

Overview In most cases the manual control of hydraulic functions are already available (e.g. when using existing tractor auxiliary valves). In some limited cases it may be necessary to add operator control for hydraulic functions, e.g. when using an additional...

Applicable to:Case IH / New Holland tractors prior to AFS Connect or PLM Intelligence systems. Connection Method COMMAND can control Case analog input (EHR) valve systems through the use of a T3H-V001 COMMAND Legacy Output Adapter.     Installation Steps The...

IMPORTANT: Please ensure you have read the safety information in the previous chapter before commencing installation of COMMAND. Machine Preparation Complete the following steps before beginning installation of the COMMAND ECU: Step Check Move the trac...

Blade Control Modes determine how Level COMMAND interprets the design surface beneath the blade when calculating the required target position. Different grading situations benefit from different control strategies. Some modes prioritise accurately following th...

When Level COMMAND is first started, the Apply View will be displayed. Before loading a project or attempting to engage Automatic Control, perform the following readiness checks. Verify GNSS Operation Once the machine is powered on, allow the GNSS receiver(s...

Symptoms: When the .gps file is loaded into the display, the system complains that the field is too far from the benchmark. Cause: When the previous design's field is left selected in the display, it will try to use the previous benchmark, which may be too ...

When you have collected your elevation or design data with an external tool, importing is the way to go. You can get here from the Main Page or from the surfacing step in the wizard. When you first open the import page, you'll be presented with a list of impor...

This manual provides instructions for the installation, configuration, and operation of T3RRA's COMMAND system. COMMAND is an automated land levelling control system that uses GNSS receivers, hydraulic interfaces, and onboard sensors to control implement movem...