Advanced Search
Search Results
495 total results found
6.1 | Understanding Surface Layers
Every grading operation performed by Level COMMAND is based on one or more surface layers. Although only a single machine is moving across the field, Level COMMAND continuously compares several different representations of the terrain to determine where the im...
Appendix A | COMMAND Settings Reference
Introduction The COMMAND Settings pages provide access to the configuration and diagnostic functions of the COMMAND Electronic Control Unit (ECU). During a new installation, these pages are used to commission the machine as described in Chapter 3 | Dealer Comm...
1.3 | Intended Use
Supported equipment and tasks Use T3RRA In-cab Software on supported construction, landforming and earthmoving machinery fitted with compatible hardware, GNSS receivers, hydraulic interfaces and machine sensors. During earthmoving and landforming, the system a...
7.5 | Versatile — Analog Scraper Control
Applicable to: Supported Versatile L4WD and DeltaTrack tractors fitted with the 6-pin C920 laser/scraper control interface connected to the tractor Gateway Control Module (GCM). NOTE: MFWD models may use a different interface arrangement. The 400 HP R3T3 MFWD ...
7.6 | External Proportional Solenoid Valves — Direct PWM Coil Drive
Applicable to: External proportional valves with solenoid coils driven directly by COMMAND’s PWM outputs. For valves fitted with Danfoss PVE electronic actuators, refer to the Danfoss PVE installation section. IMPORTANT: Confirm that the external valve’s elect...
7.7 | Fendt ONE — 900 Gen 6/7 & 1000 Gen 2/3
Applicable to: Supported Fendt 900 Gen 6/7 and Fendt 1000 Gen 2/3 tractors using the COMMAND Fendt ONE valve interface. Connection Method COMMAND connects to the tractor’s rear SCV system using the T3H-V005 ISO Valve Adapter. The adapter is installed inline be...
7.9 | Fendt 900 SCR/S4
Applicable to: Supported Fendt 900 SCR/S4 tractors using the COMMAND Fendt SCR/S4/MT valve interface. Connection Method COMMAND connects to the tractor’s rear SCV system using the T3H-V005 ISO Valve Adapter and the S/111 — Fendt 900 S4/SCR Adapter Harness. The...
7.10 | Fendt / Challenger MT
Applicable to: Supported Fendt and Challenger MT tractors using the COMMAND Fendt SCR/S4/MT valve interface. Connection Method COMMAND connects to the tractor’s rear SCV system using the T3H-V005 ISO Valve Adapter and the S/082 — Fendt/Challenger MT Adapter Ha...
7.8 | Fendt 800 SCR/S4
Applicable to: Supported Fendt 800 SCR/S4 tractors using the COMMAND Fendt SCR/S4/MT valve interface. Connection Method COMMAND connects to the tractor’s rear SCV system using the T3H-V005 ISO Valve Adapter and the S/109 — Fendt 800 SCR/S4 Adapter Harness, spe...