Blade shift settings
This is where you can change how blade shifting behaves. You can set the amount changed with each tap of the blade shift buttons. This affects how quickly you can use blade shift to adjust the target position.
Note: 'X-Slope shift per tap' won't be present if your setup doesn't have cross-slope available.
'Blade shift increment' - set the amount each tap of the up/down adjustment buttons causes the blade shift to change. Recommended distance for the blade shift increment would be 0.03 - 0.06 feet (0.4 - 0.8 inches, or 0.01m - 0.02m).
'X-Slope shift increment' - set the amount each tap of the manual left/right cross slope adjustment buttons causes the cross slope to change. Uses percentages (not degrees).
'Enable external blade shift' - With this you can also enable or disable the external blade shift feature. You shouldn't need to disable it unless the buttons are malfunctioning and sending many blade shift commands.