Level COMMAND Manual
Level COMMAND gets you moving dirt with your own tractor. It's been redesigned to get you moving dirt quicker, without hassles.
Introduction
Title
Setup & Operators Manual
Important Notices
Level COMMAND Operators Manual © 2025 T3RRA Pty Ltd Notice of Rights No part of this publicati...
Important User Information
System Usage The COMMAND and Level COMMAND system should only ever be installed or operated by i...
Important Safety Information
General Safety Guidelines Read and Understand Instructions Operators must read this manual in f...
Quick Start Guide
Start! When Level COMMAND is first started, you'll be greeted by the apply page below: Once a...
Main User Interface
The Apply View
This view is optimized to get you moving dirt. It's split into several areas. There is a on-grade...
Widget Interface
Widgets line the bottom of the apply page, and look like small information cards. They present cu...
Change Projects
To change the loaded project, tap the Change Project button on the Apply View or in the More menu...
Create Plane surfaces
Plane Project allows users to create simple surfaces without surveying the entire area. The Leve...
Create Point of interest
Click the 'Drop POI' button on the right side of the main page to open the Point of Interest page...
Blade Shift
The blade shift buttons allow you to manually shift the height of the blade; up, down, or rotate ...
Save As
Allows you to save a 2nd copy and to also save in a format that is able to be used by a previous ...
Settings
Zero to benchmark
The zero to benchmark calibrates the machine's blade height to a known reference point at ground ...
COMMAND Settings
The COMMAND settings overview page shows the different settings pages available for COMMAND contr...
COMMAND Settings - Machine
The Machine page is used to setup the connection between Level COMMAND software and the COMMAND E...
COMMAND Settings - Inputs/Offsets
The Inputs / Offsets page is used for selection of input sensors, such as GNSS receivers for heig...
COMMAND Settings - Valve Configs
The Valve Configs page is used to set up the control output interface for each control function. ...
COMMAND Settings - Valve Calibration
Finding The Calibration Menu Access the COMMAND valve calibration page by going to: More > COMMA...
COMMAND Settings - Cylinder Cals
Cylinder calibration allows you to control the relative speed of your implement's extend/retract ...
COMMAND Settings - Tuning
The Tuning page allows you to finess the tracking sensitivity of each function (height, cross slo...
COMMAND Settings - Diagnostics
The COMMAND diagnostics page is great to check what is being sent between Level COMMAND and COMMA...
COMMAND Settings - Admin
In the COMMAND Admin page you can enter your COMMAND unlock code and update firmware if required....
GPS thresholds
'GPS thresholds' - allows you to set GPS-related configuration values.'Idle Timeout'The maximum a...
Blade shift settings
This is where you can change how blade shifting behaves. You can set the amount changed with each...
Blade Control Settings
Allows you to specify how the soil profile under the blade determines blade position. Classic ...
Appearance
This page lets you adjust the appearance of Level COMMAND. You can control things such as screen ...
Layout
'Layout' - Use this page to tweak the layout of the main display, The Apply View. There are three...
Units
'Units' - allows you to set the measurement units. We recommend you restart Level COMMAND after ...
Widget Settings
To change the widgets that are displayed along the bottom of the Apply View, long-press on a widg...
Language/Accessibility
Use this page to change your language and turn on-screen keyboards on or off. ‘Language’ - Cha...
License
Level COMMAND requires a license for complete operation. You can tell if you're properly licensed...
Update/Changelog
The Update/Changelog page is where you can download any available software updates and check for ...
Get support
'Get support' - helps you receive remote support from your dealer. You must be connected to the i...
Diagnostics/Advanced
Access this page by going to: More > Diagnostics/Advanced. It's near the bottom of the settings l...
Report
'Report' - opens up a bug report/feature request window allowing you to report issues to T3RRA. T...
Zeroing
General
General information about how Level COMMAND works.