Search Results

The purpose of tuning is to achieve stable, accurate Automatic Control that follows the design surface smoothly without excessive lag or oscillation. The Tuning page provides the controls and feedback required to optimise control performance. To find the tunin...

Level COMMAND is intended for use on supported construction, landforming, and earthmoving machinery equipped with compatible COMMAND hardware, GNSS receivers, hydraulic interfaces, and machine sensors. The system is designed to assist operators with terrain gu...

Level COMMAND continuously determines the machine's position, compares it to the design surface and calculates the implement movement required to achieve the desired grade. Theory of Operation Level COMMAND is a closed-loop terrain-control operating environmen...

Level COMMAND supports multiple machine configurations depending on machine type, hydraulic capability, installed hardware, and available automatic control functions. Each machine configuration defines the supported automatic control functions and compatible m...

Level COMMAND uses GNSS positioning data, machine geometry information, and implement orientation feedback to calculate target elevations and automatic control corrections. Depending on machine configuration and enabled functions, the system may require: RTK ...

The COMMAND hardware platform supports multiple hydraulic and vehicle interface methods depending on machine configuration, installed COMMAND hardware, and enabled automatic control functions. These interfaces allow COMMAND to control implement movement and mo...

A Level COMMAND system consists of multiple hardware and software components depending on machine configuration and enabled automatic control functions. Required Components The following components are required for normal Level COMMAND operation. COMMAND ECU T...

Before Closing Level COMMAND Before closing Level COMMAND, verify that: ✓ Automatic Control has been disengaged. ✓ Hydraulic functions have been returned to manual operation. ✓ The machine is in a safe operating condition. ✓ The implement has been lowered safe...

The Appearance page allows you to customise how Level COMMAND is displayed. These settings only affect the user interface and map presentation—they do not change how the guidance or automatic control system operates. Brightness Adjusts the display brightness...

The Units page allows you to select the measurement units used throughout Level COMMAND. The available unit categories are: Length / Height – Millimetres, Centimetres, Metres, Inches, or Feet. Volume – Cubic Metres, Cubic Yards, or Cubic Feet. Area – Hectare...

The Language & Accessibility page allows you to customise the interface language and on-screen keyboard behaviour to suit your device and operating preferences. Language Selects the display language used throughout Level COMMAND. For the best experience, res...

The Licensing page is used to activate Level COMMAND and register the software for normal operation. To open the Licensing page, press More → License. A valid licence is required for normal operation. If Level COMMAND has not been activated, a Demo Mode banne...

The Update/Changelog page allows you to keep Level COMMAND up to date and review changes introduced in each software release. Keeping the software current provides access to new features, performance improvements and bug fixes. However, if the system is opera...

The Support & Error Reporting tools allow operators and dealers to receive remote assistance and provide feedback directly to T3RRA. To access the Error Reporter, press More → Report. An internet connection is required for Remote Support and sending reports. ...

What is Zeroing? Zeroing aligns the machine to the design surface so that Level COMMAND can guide the implement to the correct elevation. A valid zero is required before Automatic Control can operate accurately. If the machine is not correctly zeroed, Level C...

The Apply View is the primary operating screen used while grading. It combines machine guidance, design information, Automatic Control status and operator controls into a single workspace, allowing the operator to monitor grading progress and operate Level COM...

Pre-designed Projects allow Level COMMAND to grade using surfaces that have been created outside the application. These projects are typically prepared by a dealer, surveyor or designer before being transferred to the machine. Compared with Plane Projects, imp...

Plane Projects allow simple design surfaces to be created without first surveying the entire work area. They are commonly used for creating flat pads, graded surfaces, drain batters and other simple earthworks. Each Plane Project can contain up to four individ...