Skip to main content

Connecting COMMAND to the tractor bus using T3H-M001

Overview

COMMAND can be connected to a 250kbps Tractor CANBUS if present, which allows the ECU to read tractor data directly from tractor systems. This data can then be displayed on the widgets in Level COMMAND and is also used in the background for certain control features.

Required Parts

A port replicator is included on the T3H-M001 adapter so that other devices may be connected to the diagnostic connector when necessary without removal of COMMAND harnessing.

  • T3H-M001 - COMMAND J1939 Diagnostic Adapter (Green)

Connection Process

IMPORTANT: T3H-M001 is specifically designed for diagnostics connectors with ISOBUS or Implement CANBUS, and tractor CANBUS access. Connecting to a diagnostic plug that is linked to other CANBUS' may cause tractor system errors.

  1. Connect the T3H-M001 adapter to the appropriate diagnostic plug in the cab of the tractor
  2. Connect the T3H-M001 adapter to the T3H-C006 Cab Breakout Adapter.
  3. If appropriate tractor data is present on the tractor bus, COMMAND will begin reading the data and providing it to Level COMMAND software.
  4. Check whether any new widgets have appeared with new data in the Widgets menu of Level COMMAND.

Back to top