Search Results

COMMAND machine profiles are used to store all configuration settings for that particular implement including GNSS input selections, valve configuration, calibration and tuning values etc. Implemented and Tested Machine Profiles COMMAND currently has the follo...

The requirements below outline the important components and considerations for using a GNSS receiver with Level COMMAND. StarFire RTK, NMEA 0183 Fixed RTK over RS232 serial, or NMEA 2000 Fixed RTK output over ISOBUS/CANBUS. Suitable adapters are available to...

COMMAND can make use of either in-built rear tractor electrohydraulic valves, commonly referred to as SCVs (Selectable Control Valves) or auxiliary remotes, or externally mounted electrohydraulic valves. For each valve type, COMMAND is able to provide two rais...

WARNING:The COMMAND system can automatically control hydraulic movement without operator input.Ensure all personnel remain clear of the implement during operation. General Safety Guidelines Read and Understand Instructions Operators must read this manual in fu...

The COMMAND system must only be installed and operated by individuals trained in its functional and safety requirements. Use of the system outside the scope of this manual may result in machine damage or personal injury. If any information within this manual i...

Correct component selection is important for reliable installation and operation of the COMMAND system. Harnessing requirements will vary depending on tractor model, implement configuration, GNSS receiver type, and hydraulic interface. For assistance selecting...

General Safety Guidelines Read and Understand Instructions Operators must read this manual in full before using the system. Do not operate the system without a complete understanding of its controls and functions. Authorized Personnel Only Only trained and qua...

System Usage The COMMAND hardware platform and Level COMMAND operating environment must only be installed, commissioned, and operated by personnel familiar with machine-control systems and associated safety procedures. Any safety warnings or images used in thi...

Tractor Requirements COMMAND's tractor requirements are as follows: Provide a suitable power supply as specified in Section 4.3. Have compatible SCVs or auxiliary control valves The tractor does not need to be ISOBUS-equipped; however, upgrading to ISOBUS is ...

Installation & Operators Manual 2026

COMMAND Installation & Operators Manual © 2026 T3RRA Pty Ltd Notice of Rights No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any mea...

Level COMMAND Operators Manual © 2026 T3RRA Notice of Rights No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, m...

  Operation & User Manual       2026

Overview In most cases the manual control of hydraulic functions are already available (e.g. when using existing tractor auxiliary valves). In some limited cases it may be necessary to add operator control for hydraulic functions, e.g. when using an additional...

Applicable to:Case IH / New Holland tractors prior to AFS Connect or PLM Intelligence systems. Connection Method COMMAND can control Case analog input (EHR) valve systems through the use of a T3H-V001 COMMAND Legacy Output Adapter.     Installation Steps The...

IMPORTANT: Please ensure you have read the safety information in the previous chapter before commencing installation of COMMAND. Machine Preparation Complete the following steps before beginning installation of the COMMAND ECU: Step Check Move the trac...

This manual provides instructions for the installation, configuration, and operation of T3RRA's COMMAND system. COMMAND is an automated land levelling control system that uses GNSS receivers, hydraulic interfaces, and onboard sensors to control implement movem...

All requirements in this section must be confirmed before installing the COMMAND system.  Failure to meet these requirements may result in improper operation or system damage. Confirm the following before proceeding: Tractor compatibility Power supply suitabi...