Skip to main content

3.2 | Checking for Software & Firmware Updates

Before proceeding with machine configuration and calibration, ensure both the Level COMMAND application and the COMMAND ECU are updated to the latest available versions.

  1. Connect to the COMMAND ECU successfully as performed in section 3.1.
  2. Press "Back" to return to the COMMAND Settings Overview page, then press "Done" to return to the Apply View.
  3. Check for available Level COMMAND software updates by pressing "More" > "Update/Changelog" > "Download Updates:"
  4. Allow the updates to complete and restart Level COMMAND if prompted.
  5. Return to the Apply View.
  6. Check for available COMMAND ECU firmware updates by pressing "More" > "COMMAND Settings" > "Admin" > "Update to Latest".
  7. Allow any updates to install completely.
  8. Restart the ECU by turning off the machine and restarting.

IMPORTANT: First setup & calibration should not begin until all updates are completed successfully. 

Software and firmware updates may include:

  • Feature improvements
  • Bug fixes
  • GNSS compatibility updates
  • Calibration improvements
  • Stability enhancements

After updating:

  • Verify communication with the ECU
  • Ensure no active faults or warnings are present at machine-level.

Continue to 3.3 | Selecting A Machine Profile.

Back to top