Skip to main content

3.1 | Connecting to the COMMAND ECU

The Machine page is used to setup the connection between Level COMMAND software and the COMMAND ECU in addition to selecting the machine profile being used. To get to this page, first go to the COMMAND Settings page and click the top left 'Machine' button.

image.png

ECU Serial Connection

Begin by connecting to the COMMAND ECU using the Comms tab. Select the correct COM port from the list, or click the 'Scan ports' button to search for COMMAND data among all serial ports present.

If the ECU is detected successfully, click Connect.

Level COMMAND will:

    Establish communication with the ECU Read stored parameters Load the current machine configuration

    image.png

    Connection Failure

    If Level COMMAND fails to connect to the ECU over the chosen COM port, a warning will be displayeddisplayed. as shown below. 

    If connection fails:

      Verify ECUpower powerand Confirm the correct COM port is selected Check USB or serialcommunication connections before retrying.

      image.pngSuccessful Connection

      Once connected to the ECU successfully, Level COMMAND will:

        Establish communication with the ECU Read stored parameters Load the current machine configuration

        Once connected, proceed to Profile Setup.

        image.png


        Back to top