1.5 | Operator Responsibilities
System Usage
The COMMAND hardware platform and Level COMMAND operating environment must only be installed, commissioned, and operated by personnel familiar with machine-control systems and associated safety procedures.
Any safety warnings or images used in this manual should be closely observed to ensure safe usage of the COMMAND and Level COMMAND system. If any information provided in this manual is not understood by the technician or operator, they must contact T3RRA prior to usage of the system.
Operators are responsible for verifying correct system setup, terrain alignment, project selection, and machine response before engaging automatic control.
Prior to operation, verify:
- machine calibration,
- active project data,
- benchmark alignment,
- GNSS quality,
- and hydraulic response.
Automatic control functions should only be engaged after confirming safe and predictable implement movement. Operators must remain aware of terrain conditions, nearby personnel, and machine behaviour at all times during operation.
Technical Support
For technical support associated with COMMAND or Level COMMAND, please contact T3RRA. Support is available via phone, emailphone and the Internetemail during business hours, Monday to Friday.
Address
You Shedcan 4,find 18our Roclaaddresses, Court,emails, Glenvaleand QLDphone 4350
Website
on homepage at www.t3rra.com.
Email
Phone (AU)
T3RRA Office - (+61) 07 4633 2790
T3RRA Hardware Support - (+61) 0428 922 668
Renee - (+61) 456 824 102
Phone (USA)
Gwen - (+1) 501 804 1415
Hunter - (+1) 501 804 8036