6.2 | Connecting a Joystick to COMMAND
Optionally connect a compatible joystick to provide manual operator control of height and cross-slope functions.
If using a compatible analog or J1939 CANBUS joystick, this can be connected to the T3H-C002 directly or via a joystick extension harness.
The
joystick'sEnsure cablethe mustjoystick beis fitted with an 8-way Deutsch DT
Plugplug (DT06-8S)
.
forMount connectionthe joystick in an appropriate location in-cab according to
themanufacturer COMMANDmounting ECUinstructions.
breakout harness.
Connect the
8-way Deutsch DT Plugplug to the connector
labelled “Joystick” on the
T3H-C002 labelledharness.
"Joystick",Verify ensuring that the joystick plugcorrect pin
positionsalignment arebefore correct.connecting.
See below for the pin positions and connector information noting that this is the receptacle on the T3H-C002 ECU breakout harness.
TheMating matingjoystick connection will require the followingconnector parts:
Connector:Connector: DT06-8S / DT06-8SAContacts:Contacts: 1062-16-0122 or AT62-16-0122
