6.2 | Connecting a Joystick to COMMAND
Optionally connect a compatible joystick to provide manual operator control of height and cross-slope functions.
If using a compatible analog or J1939 CANBUS joystick, this can be connected to the T3H-C002 directly or via a joystick extension harness.
- Ensure the joystick is fitted with an 8-way Deutsch DT plug (DT06-8S).
- Mount the joystick in an appropriate location in-cab according to manufacturer mounting instructions.
- Connect the plug to the connector labelled “Joystick” on the T3H-C002 harness.
- Verify correct pin alignment before connecting.
See below for the pin positions and connector information noting that this is the receptacle on the T3H-C002 ECU breakout harness.
Mating joystick connector parts:
- Connector: DT06-8S / DT06-8SA
- Contacts: 1062-16-0122 or AT62-16-0122