Skip to main content

12V Switched Power

A switched 12V power supply is required for the COMMAND system. 

The COMMAND harnessing system has been designed to provide flexibility in provisioning 12V switched power. The following options are available.available to the installer. 

    Convenience
    Socket

    Using an available convenience socket in cab and the T3H-PWR-2 Power Adaptor (DT06-2S & Convenience Plug).

    image.png

    image.png

     

    A custom connection in-cab or externally

    A custom connection to switched 12V power can be made using the T3H-PWR-1 Power Adaptor (DT06-2S & Loose Wire Ends). 

    The installing technician must provide the appropriate termination for the application. Power

    shall

    warning_72dp_F19E39_FILL0_wght400_GRAD0_opsz48(1).png

     

    This power must be fusedfuse protected (10 amps). This

    can be achieved using the

     T3H-F003

    (COMMAND

    image.png

    In-line Fuse Adaptor). 

    Using the John Deere Constant Power Harness (BPF10404) 

     

    Back to top