Supported Implement Types

COMMAND machine profiles are used to store all configuration settings for that particular implement including GPS input selections, valve configuration, calibration and tuning values etc.

COMMAND currently has the following machine profiles available for selection on the ECU:

Machine Profile	Description	Example Usage
Single Scraper - Height	Function 1 - Height	A bucket scraper with single proportional height control valve and a single GNSS receiver
Single Scraper - Height & XSlope	Function 1 - Height Function 2 - XSlope / Tilt	A bucket scraper with a single proportional height and single proportional tilt control valve fitted with a single GNSS receiver and single inertial measurement unit (IMU)
Ditcher - Height	Function 1 - Height	A V-ditcher with a single proportional height control valve and a single GNSS receiver.
Ditcher - Height & Pitch	Function 1 - Height Function 2 - Pitch	A tile plow with a single proportional height, single proportional pitch control valve, single GNSS receiver and single inertial measurement unit (IMU)
Tandem Scrapers - Height	Function 1 - Height 1 Function 1 - Height 2	Two bucket scrapers in tandem, each with a single proportional height control valve and single GNSS receiver
Single Scraper - Dual Height	Function 1 - Height Left	A bucket scraper with a single proportional height control valve but two GNSS receivers (One on the  left of the implement, one on the right)
Single Scraper - Height (Dual Cylinder)	Function 1 - Height Left Function 2 - Height Right	A buclet scraper with dual proportional height control valves (controlling left and right height separately) and a single GNSS receiver
Single Scraper - Height & XSlope (Dual Cylinder)	Function 1 - Height Left Function 2 - Height Right	A buclet scraper with dual proportional height control valves (controlling left and right height separately), a single GNSS receiver and a single inertial measurement unit (IMU).