Supported Implement Types

COMMAND currently has the following machine profiles available for selection on the ECU:

Machine Profile Description Example Usage Single Scraper - Height Function 1 - Height A bucket scraper with single proportional height control valve and a single GNSS receiver Single Scraper - Height & XSlope

Function 1 - Height

Function 2 - XSlope / Tilt

A bucket scraper with a single proportional height and single proportional tilt control valve fitted with a single GNSS receiver and single inertial measurement unit (IMU) Ditcher - Height Function 1 - Height A V-ditcher with a single proportional height control valve and a single GNSS receiver. Ditcher - Height & Pitch

Function 1 - Height

Function 2 - Pitch

A tile plow with a single proportional height, single proportional pitch control valve, single GNSS receiver and single inertial measurement unit (IMU) Tandem Scrapers - Height

Function 1 - Height 1

Function 1 - Height 2

Two bucket scrapers in tandem, each with a single proportional height control valve and single GNSS receiver Single Scraper - Dual Height

Function 1 - Height Left

 

A bucket scraper with a single proportional height control valve but two GNSS receivers (One on the  left of the implement, one on the right) Single Scraper - Height (Dual Cylinder) Function 1 - Height Left A buclet scraper with dual proportional height control valves (controlling left and right height separately) and a single GNSS receiver Single Scraper - Height & XSlope (Dual Cylinder)
A buclet scraper with dual proportional height control valves (controlling left and right height separately), a single GNSS receiver and a single inertial measurement unit (IMU).

COMMAND machine profiles are used to store all configuration settings for that particular implement including GPS input selections, valve configuration, calibration and tuning values etc.