Supported Implement Types

COMMAND currently has the following machine profiles available for selection on the ECU:

Machine Profile	Description	Example Usage
Single Scraper - Height	Function 1 - Height	A bucket scraper with single proportional height control valve and a single GNSS receiver
Single Scraper - Height & XSlope	Function 1 - Height Function 2 - XSlope / Tilt	A bucket scraper with a single proportional height and single proportional tilt control valve fitted with a single GNSS receiver and single inertial measurement unit (IMU)
Ditcher - Height	Function 1 - Height	A V-ditcher with a single proportional height control valve and a single GNSS receiver.
Ditcher - Height & Pitch	Function 1 - Height Function 2 - Pitch	A tile plow with a single proportional height, single proportional pitch control valve, single GNSS receiver and single inertial measurement unit (IMU)
Tandem Scrapers - Height	Function 1 - Height 1 Function 1 - Height 2	Two bucket scrapers in tandem, each with a single proportional height control valve and single GNSS receiver
Single Scraper - Dual Height	Function 1 - Height Left	A bucket scraper with a single proportional height control valve but two GNSS receivers (One on the  left of the implement, one on the right)
Single Scraper - Height (Dual Cylinder)	Function 1 - Height Left	A buclet scraper with dual proportional height control valves (controlling left and right height separately) and a single GNSS receiver
Single Scraper - Height & XSlope (Dual Cylinder)		A buclet scraper with dual proportional height control valves (controlling left and right height separately), a single GNSS receiver and a single inertial measurement unit (IMU).

COMMAND machine profiles are used to store all configuration settings for that particular implement including GPS input selections, valve configuration, calibration and tuning values etc.