Supported Implement Types

COMMAND machine profiles are used to store all configuration settings for that particular implement including GPS input selections, valve configuration, calibration and tuning values etc.

Implemented and Tested Machine Profiles

COMMAND currently has the following machine profiles available for selection on the ECU:

Machine Profile	Controlled Functions	Example Usage
Single Scraper - Height	Function 1 - Height	A bucket scraper with single proportional height control valve and a single GNSS receiver
Single Scraper - Height & XSlope	Function 1 - Height Function 2 - XSlope / Tilt	A bucket scraper with a single proportional height and single proportional tilt control valve fitted with a single GNSS receiver and single inertial measurement unit (IMU)
Single Ditcher - Height	Function 1 - Height	A V-ditcher with a single proportional height control valve and a single GNSS receiver.

Machine Profiles Currently In Testing

The machine profiles below will become available once they've been thoroughly tested and confirmed to work exactly as they should.

Want to help us develop the best possible solution we can while being one of the first to use COMMAND in your own way? Contact us if you'd like to be involved in testing any of the machine profiles below and would like to be involved - we're always looking for good testing co-operators!

Machine Profile	Controlled Functions	Example Usage
Single Ditcher - Height & Pitch	Function 1 - Height Function 2 - Pitch	A tile plow with a single proportional height, single proportional pitch control valve, single GNSS receiver and single inertial measurement unit (IMU).
Tandem Scrapers - Height	Function 1 - Height 1 Function 2 - Height 2	Two bucket scrapers in tandem, each with a single proportional height control valve and single GNSS receiver.
Single Scraper - Dual Height	Function 1 - Height	A bucket scraper with a single proportional height control valve but two GNSS receivers (One on the  left of the implement, one on the right)
Single Scraper - Height (Dual Cylinder)	Function 1 - Height Left Function 2 - Height Right	A bucket scraper with dual proportional height control valves (controlling left and right height separately), and two GNSS receivers (left and right). Maintains blade angle to allow manual X-Slope / Tilt operation.
Single Scraper - Height & XSlope (Dual Cylinder)	Function 1 - Height Left Function 2 - Height Right	A bucket scraper with dual proportional height control valves (controlling left and right height separately), and two GNSS receivers (left and right).