The Apply View

This view is optimized to get you moving dirt. It's split into several areas. There is a on-grade indicator on the left, map and implement views in the center, options on the right, and status widgets along the bottom.

Left: On-grade indicator

The on-grade indicator displays how far you are from the current target elevation. If you're too high, blocks above the mid-point will be highlighted. If you're too low, blocks below will be highlighted. If you look closely, your control error will be shown at the top. And if you have nudged the blade up or down, a hint will be shown at the bottom.

Center: Map and implement views

This displays your current location and optionally a side and back view of your implement.

Right: Options

On the right, several buttons allow you to operate and configure Level COMMAND. Tap one to show more details.

NOTE: To exit from Level COMMAND, simply tap the More button then tap the Close App button.

Bottom: Status widgets

These small rectangles show various details about your system. You can pick new ones by long-pressing on them. There are many to select from, so try them out till you've found the right ones! But the one in the bottom right will always be the COMMAND status widget.