COMMAND Settings - Valve Configs

The

Valve

Configs page is used to set up the control output interface for each control function. Appropriate signals of that interface type are then generated when automatic or manually controlling the implement. External joystick inputs are also configured on this page when making use of an analog or J1939 CANBUS joystick.

At the bottom right corner of the screen, buttons will be shown if there are two available control functions. If using a Height control only machine profile, only the Height page is displayed.

Valve Interface

Select the appropriate valve interface for the tractor, machine or external valves being used for that function. To begin with, set the desired valve interface type of the Height control function.

Different Valve Interface selections display different Valve Number selections depending on how they work - for more information please see the section in the COMMAND manual.

When selecting the Valve Interface, options like JD CAN, J1939 and Fendt ONE will only display valve numbers that have been detected on the ISOBUS or machine CANBUS.