Skip to main content

COMMAND Settings - Machine

The Machine settingspage is used to setup the connection withbetween Level COMMAND software and alsothe COMMAND ECU in addition to configureselecting the machine profile thatbeing is in use.used.

Comms

When clicking on Scan ports button, Level COMMAND will search for the serial port connected to the ECU. If the scan was successful, clicking on Connect will read the parameters.

image.png

image.png

Profile

The profile is used to setup the type of equipment being used.

image.png

After setting the profile it is necessary to inform the blade width.

image.png

Back to top