Blade shift settings

AllowsThis is where you tocan change how blade shifting behaves. You can set the amount changed with each tap of the adjustmentblade shift buttons. This theaffects ratehow of movementquickly you willcan haveuse when using the blade shift.  to adjust the target position. 

Note: 'X-Slope Nudgeshift shiftper tap' won't be present if your setup doesn't have cross-slope availableavailable.

'X-Slope shift increment' - set the amount each tap of the manual left/right cross slope adjustment buttons causes the cross slope to change. Uses percentages (not degrees).

• Main page ➛ Blade shift ➛ To shift

'Blade shift increment' - set the amount each tap of the up/down adjustment buttons causes the blade shift to change. Recommended distance for the blade shift increment would be 0.03 - 0.06 feet (0.4 - 0.8 inches, or 0.01m - 0.02m).

• Main page page ➛ Blade shift

 

 

 

'X-Slope shift increment' - set the amount each tap of the manual left/right cross slope adjustment buttons causes the cross slope to change. Uses percentages (not degrees).

• Main page ➛ Blade shift ➛ To shift

 

 

'Enable external blade shift' - With this you can also enable or disable the external blade shift feature. You shouldn't need to disable it unless the buttons are malfunctioning and sending many blade shift commands.