Skip to main content

8.3 | Modern Case IH / New Holland / Trimble

Applicable to:

  • Case IH - Vector Pro0
  • New Holland - PLM Cygnus
  • Trimble - AG-372, AG-392, NAV-900
  • Steyr - S-Guide

VectorPro.pngimage.pngimage.pngimage.png

Parts Required

  • BPF11284 - Front Extension Harness (10m)
  • PF81137 - Implement Pigtail Terminator Wiring Harness
  • T3H-G002 - COMMAND Impl Adapter - NAV-900
  • T3H-S001 - COMMAND Impl Adapter – Stub Junction
  • Optional - T3H-G001 / T3H-G007 - COMMAND NMEA Extension Harness
    • Only required if using NMEA 0183 Serial for GNSS data.

Connection Process

    1.

    Connect the John Deere Front Extension Harness to the IBBCISOBUS andbreakaway routeconnection. it

    2. Route along the hosing/implement making sure to leave some slack whereverat thepivot hitchpoints might flex but alsoand paying close attention to any objects that could get caught on the harnessing.

    image.png

      3.

      Connect the T3H-S001 adapter to the Front Extension Harness.

      image.pngAGV_vUfb18F8k_oebTBPqwfo9XiNBZNwKnM3oAVQCWqCnu81_ej-90MsO88UGKN3PqpReGufqT-IkPoI1yc2PhvecRKLpNyTiBilDY77gJACZvIxS1F6s2OWMRFvOABjb9rzPqRAgXX6yw=s2048?key=pKn9UTVcy7kVo7f76IQZkQ

        4.

        Connect the Implement Pigtail Terminator to the T3H-S001 adapter and secure the terminator to the implement receiver wiring harness.

        image.png

           

          5. Connect the T3H-G002 adapter to the T3H-S001 adapter.

          image.png

            6.

            Connect the T3H-G002 adapter to the appropriate GNSS receiver port.

            7.
              If using NMEA 0183 Serial, also connect the NMEA extension harness to the T3H-G002, then connect the other end to the T3H-C002 ECU breakout harness.

              Verify:
              - Receiver powers on
              - GNSS data is being received by COMMAND

              Back to top