Skip to main content

AFS Vector Pro, PLM Cygnus, AFS 392, Ag 372, NAV-900

Relevant Receiver Models

This section is aimed at connecting Novatel-based Case/NH/Trimble receivers with a 12-pin Deutsch DTM connection. The receiver can be connected to John Deere implement harnessing using the T3H-G002 adapter harness.

    Case IH - Vector Pro New Holland - PLM Cygnus Trimble - AG-372, AG-392, NAV-900 Steyr - S-Guide


    Parts Required

      BPF11284 - Front Extension Harness (10m) PF81137 - Implement Pigtail Terminator Wiring Harness T3H-G002 - COMMAND Impl Adapter - NAV-900 T3H-S001 - COMMAND Impl Adapter – Stub Junction Optional - T3H-G001 / T3H-G007 - COMMAND NMEA Extension Harness
        Only required if using NMEA 0183 Serial for GNSS data.

        Connection Process

          Connect the John Deere Front Extension Harness to the IBBC and route it along the hosing/implement making sure to leave some slack wherever the hitch might flex but also paying close attention to any objects that could get caught on the harnessing. Connect the T3H-S001 adapter to the Front Extension Harness. Connect the Implement Pigtail Terminator to the T3H-S001 adapter and secure the terminator to the implement receiver wiring harness. Connect the T3H-G002 adapter to the T3H-S001 adapter. Connect the T3H-G002 adapter to the appropriate GNSS receiver port. If using NMEA 0183 Serial, also connect the NMEA extension harness to the T3H-G002, then connect the other end to the T3H-C002 ECU breakout harness. Check that the receiver powers up correctly and that data is being received by COMMAND

           

          Back to top