Skip to main content

5.4 | Connecting COMMAND to the ISOBUS

ECU Mounted In-cabimage.png

With the COMMAND ECU mounted in-cab:

    Locate the in-cab 4-way ISOBUS connector. Connect the 4-way ISOBUS connection on the T3H-C006 cab breakout harnessto tothe connector. Use an existingadditional 4-wayadapter ISOBUSif plugconnecting in the cab.

    Alternatively ato 9-way cab ISOBUSISO receptaclereceptacle.

    may also be used if present but will require an additional adapter.

    ECU Mounted at Rear of Tractor

    With the COMMAND ECU mounted at the rear panel or near the ISOBUS breakaway plug:

    1. Disconnect the existing 4-way plug from the ISOBUS implement breakaway connector.
    2. Connect the disconnected plug to the receptacle on the ISOBUS "T" connection on the T3H-C005 external breakout.
    3. Connect the 4-way ISOBUS "T" plug into the ISOBUS implement breakaway connector. 

    4-way ISOBUS connection


    image.png

     

    Back to top