Skip to main content

5.4 | Connecting COMMAND to the ISOBUS

ECU Mounted In-cabimage.png

With the COMMAND ECU mounted in-cab,cab:

Connect the 4-way ISOBUS connection on the T3H-C006 cab breakout harness can be connected to thean existing 4-way ISOBUS plug if a suitable connection is present withinin the cab. 

Harnessing can be used to connect the T3H-C006 cab breakout harness toAlternatively a 9-way in-cab ISOBUS receptacle.receptacle may also be used if present but will require an additional adapter.

ECU Mounted at Rear of Tractor

With the COMMAND ECU mounted at the rear panel or near the ISOBUS breakaway plug,plug:

    Disconnect the existing 4-way plug from the ISOBUS implement breakaway connector. Connect the disconnected plug to the receptacle on the ISOBUS "T" connection on the T3H-C005 external breakoutbreakout. harness should be connected toConnect the 4-way ISOBUS connection"T" atplug the back ofinto the ISOBUS implement breakaway connector. 

    4-way ISOBUS connection

    Unplug the existing 4-way plug that's inserted into the breakaway plug and connect this to the T3H-C005 ISOBUS "T" connection, then connect the 4-way plug on T3H-C005 to the implement breakaway plug's 4-pin receptacle.

    image.png

     

    Back to top