Skip to main content

Connecting COMMAND to the ISOBUS

ECU Mounted In-cabimage.png

With the COMMAND ECU mounted in-cab, the 4-way ISOBUS connection on the T3H-C002C006 ECUcab breakout harness shouldcan be connected to the 4-way ISOBUS plug onif thea Greenstarsuitable ISOconnection harnessis locatedpresent inwithin the cab. 

John Deere part number XXXXX can be used to connect the T3H-C006 cab breakout harness to a 9-way in-cab ISOBUS receptacle.

 

 

 

 

 

ECU Mounted at Rear of Tractorimage.png

With the COMMAND ECU mounted in-cab,at the rear panel or near the ISOBUS breakaway plug, the 4-way ISOBUS "T" connection on the T3H-C002C005 ECUexternal breakout harness should be connected to the 4-way ISOBUS connection at the back of the implementISOBUS breakaway connector.

Unplug the existing 4-way plug that's inserted into the breakaway plug and connect this to the T3H-C005 ISOBUS "T" connection, then connect the 4-way plug on T3H-C005 to the implement breakaway plug's 4-pin receptacle.

 

 

Back to top