Skip to main content

5.3 | Powering COMMAND

Cab Mounted ECU

COMMAND can be powered using an available cab convenience power socket along with the T3H-F001 Power Adaptor provided by T3RRA. When mounted in-cab this is the preferred option. If no convenience power outlets are available, consider using a  adapter instead of T3H-F001 if power strip connections are available.

image.png

 

Convenience Power and Power Strip Outlets

image.png

 

T3H-F001

image.png

 

COMMAND 2-pin Power Input

Rear Panel or ISOBUS Breakaway Mounted ECU

If the COMMAND ECU is mounted under the rear panel of the tractor, we recommend powering using a John Deere constant power harness kit (Rowcrop - BPF10403, Articulated - BPF10404).

image.png

Or, alternatively, connecting to any available unswitched and switched power studs underneath the cab using a T3H-F003 fuse adapter and creating a 2-core cable of appropriate length. COMMAND unswitched power input may be connected to switched power with no issue, but do NOT connect unswitched power to the switched power input as this will drain battery while the tractor is switched off.

image.png

Back to top