Selecting System Components

For the best experience ordering a COMMAND hardware kit, use our COMMAND kit picker at t3rra.com or call us for guidance. The kit picker streamlines the process of ordering required and optional components, avoiding potential headaches due to missing parts.

There's a huge range of tractor and scraper brands and models out there, not to mention custom jobs. Selecting the right kit components is crucial to a good experience with fitting the system, and we're currently working on some streamlined ways to choose just the right components for a use-case in a build-as-you-go style format. In the meantime please contact us with any compatibility questions and we'll be happy to help select what's needed.

Factors that will affect harnessing requirements include:

Tractor brand
Tractor model
Scraper brand
Scraper model
GNSS receiver model
Available Electrohydraulic Valves

Taking Advantage of John Deere Harnessing

The COMMAND harnessing system has been designed to allow us to leverage existing customer and dealer knowledge of John Deere harnessing systems. We can then take advantage of this familiarity on the technical support front, ~~meanwhile~~while leveraging the fact that John Deere dealers also possess many of these parts in stock at-the-ready.

~~All~~

Typical John Deere harnessing components below are required for a standard installation of COMMAND.Components

SKU / Part No.	Name
BPF10403 OR BPF10404 OPTIONAL POWER	Constant Power Harness (Row Crop) OR Constant Power Harness (Articulated)
BPF11117 REQUIRED	Front Extension Wiring Harness Kit (including terminator module)
RE174725 OR RE174726 IF ~~REQUIRED~~NO ISOBUS PRESENT	GreenStar™ Ready Field Installation Kit (Rowcrop) OR GreenStar™ ISO Implement Connector Field Installation Kit (Articulated)

PF90538

IF USING STARFIRE GNSS

Implement Receiver Wiring Harness Kit

BPF10547

REQUIRED

iGrade Counterbalance Valve kit - generally recommended and mandatory for proper operation with certain SCVs and external valves.

Base SystemCOMMAND Components

All components below are required for a ~~standard~~base installation of COMMAND

SKU / Part No.	Name
T3H-E001	COMMAND ECU – Controller Only
T3H-L001	COMMAND ECU Licence – Licence Only
T3H-C002	COMMAND ECU Adapter - CAN & Analog
T3H-C003	COMMAND Arm/Engage Switch Adapter
T3H-C004	COMMAND Arm/Engage Switch
T3H-C005	COMMAND ISOBUS/Ext Breakout Adapter
T3H-C006	COMMAND Cab Breakout Adapter
T3H-C008	COMMAND Cab/Ext Extension Adapter
T3H-~~S001~~

~~COMMAND Impl Adapter – Stub Junction~~

~~T3H-~~T001

Tablet Serial Interface Adapter (RA 4m)

Optional SystemCOMMAND Components

Components listed below are optional for COMMAND and will only be required for certain tractor models, scraper models, GNSS receivers, Tilt sensors or Electrohydraulic valves.

SKU / Part No.	Name
Tractor Harnessing	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
T3H-F001	Cab Convenience Power Adapter
T3H-F002	External Loose End Power Adapter
T3H-F003	COMMAND Inline Fuse Adapter
T3H-M001	COMMAND J1939 Diagnostic Adapter (Green)
T3H-V001	COMMAND Legacy Analog Output Adapter
T3H-T002

Tablet Serial Interface Adapter (RA 6m) Implement Harnessing ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ T3H-E003 COMMAND Inclination Sensor – TARS-B T3H-G001 COMMAND NMEA Extension Harness (8m) T3H-G002 COMMAND Impl Adapter – NAV-900 / Ag372 T3H-G003 COMMAND Impl Adapter – Emlid Reach RS2/RS2+/RS3 T3H-G004 COMMAND Trimble NMEA Output Adapter T3H-G007 COMMAND NMEA Extension Harness (12m) T3H-S001

COMMAND Impl Adapter – Stub Junction