# 3.3 | Selecting A Machine Profile

[![image.png](https://docs.t3rra.com/uploads/images/gallery/2026-06/scaled-1680-/MCK63PonelH71g36-image.png)](https://docs.t3rra.com/uploads/images/gallery/2026-06/MCK63PonelH71g36-image.png)

#### Profile

The profile is used to select the type of implement being used, for detailed information on available profiles please refer to the **COMMAND** hardware manual section.

[![image.png](https://docs.t3rra.com/uploads/images/gallery/2026-06/scaled-1680-/pvdh4I0GKdIBhX6h-image.png)](https://docs.t3rra.com/uploads/images/gallery/2026-06/pvdh4I0GKdIBhX6h-image.png)

After selecting the appropriate machine profile, enter a **Blade Width** in the field shown - a red exclamation mark icon indicates that the blade width has not been set yet.

[![image.png](https://docs.t3rra.com/uploads/images/gallery/2026-06/scaled-1680-/YAJeEfaKtSCNCKno-image.png)](https://docs.t3rra.com/uploads/images/gallery/2026-06/YAJeEfaKtSCNCKno-image.png)

Press "**Back**" to return to the COMMAND Settings Overview and continue to **3.4 | Configuring GNSS**.